- For the MSR-100 Remote accessory wiring, use the following wiring connections: C+ to 20, T/R to 1, P+ to 2, AL+ to 11, C- to 19.
- For the MSR-50 Remote accessory wiring, use the following wiring connections: T/R to 1, P+ to 2, AL+ to 11, C- to 19.
- For MS series remotes, only wire for the features on your remote. For instance a remote with a key and red LED would only wire for those features. The following are the wiring contacts:
- Red alarm LED- black wire to 19, red wire to 11
- Buzzer- black wire to 19, red wire to 11
- Green pilot LED- black wire to 19, red wire to 2
- Key or pushbutton test and reset- 1 black wire to 1 and the other black wire to 20
- Yellow trouble LED- black wire to 19, red wire to 4, and a jumper between 20 and 15
- For individual horns, strobes or horn and strobe combos, Wire the positive to 14, the negative to 19, and put a jumper between 13 and 20
