The MR-608/T Relays offer SPDT 10 Amp contacts @ 120VAC and 7 Amp @ 24VDC with manual override capabilities by means of an integral “ON–AUTO–OFF” switch. Eight modules come complete with track mounting hardware which facilitates installation in standard cabinets.
Documentation
MR-608 T DATA.pdf
MR-608 T INSTALL.pdf
Relay Product Catalog & Data Sheet
Brand Information
The MR-600 Series Relays offer SPDT 10 Amp contacts @ 120VAC and 7 Amp @ 24VDC with manual override capabilities by means of an integral “ON–AUTO–OFF” switch. The switch requires a 24VAC or 24VDC constant “supply” power source to energize the relay when the switch is in the “ON” position. With the switch in the “AUTO” position, the relay is allowed to operate as signaled by the controlling system via a separate “control” input at 24VAC or 24VDC, in the same polarity. With the switch in the “OFF” position the relay will not be energized.
Application
These devices are ideal for Applications where local manual override controlled contacts are required for control of electrical loads or for general purpose switching. They are suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management, and Lighting Control Systems.
Product Information
The MR-608/T Relays offer SPDT 10 Amp contacts @ 120VAC and 7 Amp @ 24VDC with manual override capabilities by means of an integral “ON–AUTO–OFF” switch. Eight modules come complete with track mounting hardware which facilitates installation in standard cabinets.
Key Features
SPDT
Eight position relay modules
The “supply” power to each relay position is bussed on the printed wiring board via color coded jumpers, which permits “supply” power to be connected only once per multi-position module. These jumpers also allow position isolation or separation if cut.
Relays may be energized from a voltage source of 24VDC or 24VAC
Each relay position contains a red LED, which illuminates when the coil is energized, providing a time saving device when checking an installed system – no metering is required
Single, dual, or triple relay modules may be “snapped apart” from standard 8 position master
Integral “ON-AUTO-OFF” switch for local manual control
“/T” versions UL Recognized Component
“/T” versions come complete with track mounting hardware which facilitates installation in standard cabinets
“/T” versions are configured for an available optional DIN/“A” series rail mounting clip (TK-CL)
Key Benefits
Designed and Manufactured in the USA.
General
Warranty 18 months
Performance
Operating Element “On-Auto-Off” Switch
Electrical
Status Indicator – Relay Active Red
Environmental
Humidity (Min) 0% RH
Humidity (Max) 93% RH
Humidity Note no condensation or icing
Humidity 0% to 93% (no condensation or icing)
Operating Temperature (Min) 0°C
Operating Temperature (Max) 49°C
Operating Temperature 0 to 49°C
Conformance
Standards UL 864
Mechanical
Weight 1lbs
Product Height (Wo/Base) 88.9mm
Product Width 215.9mm
Product Depth 34.925mm
