TK-325 Track only “On-Track” is an innovative new track system for mounting 3.25” printed circuit boards. The circuit boards simply snap in and out of the track for easy installation and service. The boards are held secure by the built-in locking tabs which firmly clamp both the front and back surface of the board. Each 8” wide section is pre-scored at 2” intervals, so breaking it up into four smaller sections for smaller boards is literally a snap.
Documentation
Relay Product Catalog & Data Sheet
Brand Information
“On-Track” is an innovative new track system for mounting 3.25” printed circuit boards. The circuit boards simply snap in and out of the track for easy installation and service. The boards are held secure by the built-in locking tabs which firmly clamp both the front and back surface of the board. Each 8” wide section is pre-scored at 2” intervals, so breaking it up into four smaller sections for smaller boards is literally a snap.
Brand Features
Mounting the track/PCB assembly can be accomplished via two slotted or one center screw/rivet holes located on each 2” section. Mounting can also be accomplished using double-sided tape, or the optional TK-CL snap-in rail (standard DIN or “A” series) mounting clip. The TK-325 and TK-CL truly allow your circuit board integrations to stay “On-Track”.
Clean breaking plastic – “No Tools Required”
Standard size 3.50” (89mm) H x 8.00”(203mm) W x 0.75” (19mm) D
Convenient snap apart scoring for 2” sections
Both slotted and non-slotted screw/rivet holes on each 2” section
Snap-in DIN or “A” series adaptor clip holes on each 2” section
Allows for both horizontal and vertical mounting
Unique circuit board snap-in tabs allow for easy “in and out” functionality while providing positive, secure board clamping
Low profile design ensures efficient use of both lateral and vertical space available
Optional snap-in standard DIN or “A “series mounting rail adaptor (TK-CL) available
8” sections can be butted together allowing for unlimited overall lengths
Fits printed circuit boards 3.25”(83mm) H x up to 8” (203mm) W x 0.065” (1.65mm) D
Product Information
TK-325 Track only
“On-Track” is an innovative new track system for mounting 3.25” printed circuit boards. The circuit boards simply snap in and out of the track for easy installation and service. The boards are held secure by the built-in locking tabs which firmly clamp both the front and back surface of the board. Each 8” wide section is pre-scored at 2” intervals, so breaking it up into four smaller sections for smaller boards is literally a snap.
Key Features
Mounting the track/PCB assembly can be accomplished via two slotted or one center screw/rivet holes located on each 2” section. Mounting can also be accomplished using double-sided tape, or the optional TK-CL snap-in rail (standard DIN or “A” series) mounting clip. The TK-325 and TK-CL truly allow your circuit board integrations to stay “On-Track”.
Clean breaking plastic – “No Tools Required”
Standard size 3.50” (89mm) H x 8.00”(203mm) W x 0.75” (19mm) D
Convenient snap apart scoring for 2” sections
Both slotted and non-slotted screw/rivet holes on each 2” section
Allows for both horizontal and vertical mounting
Unique circuit board snap-in tabs allow for easy “in and out” functionality while providing positive, secure board clamping
Low profile design ensures efficient use of both lateral and vertical space available
8” sections can be butted together allowing for unlimited overall lengths
Fits printed circuit boards 3.25”(83mm) H x up to 8” (203mm) W x 0.065” (1.65mm) D
Conformance
Standards UL 508
Mechanical
Color Grey
Product Height (Wo/Base) 88.9mm
Product Length 203.2mm
Product Width 19.05mm
